Thursday, May 12, 2016

APN settings for Saudi Arabia network providers: UNLOCKED 4G LTE routers QDC QUANTA

Settings:

Here are the settings, leave everything else as it is in picture,

Just you need to change APN according to your network sim

FOR STC:

APN:  jawalnet.com.sa

FOR ZAIN

APN: zain

FOR MOBILY itself ;) really you need this APN, ok here it is

APN: web2

 IF you don't like to change APN settings every time you use different network provider sim, simply leave this portion Blank and change 'Always Connected' to 'Auto Network triggered' and Apply Changes.

It should work fine without changing APN settings with every sim.

Comments and problems are welcome.

17 comments:

  1. Hi, can i configure also this mobily 4g router as an access point..How...? thanks.

    ReplyDelete
  2. ofcourse u can, just use apn 'web2' and leave user name and password blank.. However if u want to change sim to another user, u have to change to that apn.

    Also if u want it open automatic, then change in settings 'always connected' to 'Auto(traffic triggered)'

    IN THIS WAY, NO NEED TO CHANGE APN everytime u wish to change sim, it should connect automatically.

    Need any more help, feel free...

    ReplyDelete
  3. i have qdc blank vendor info
    version, also imei blank all
    how to fix ...help please

    ReplyDelete
    Replies
    1. Please follow the steps in my previous posts on how to unlock device. thanks

      Delete
    2. Please give me your WhatsApp number I want to talk you

      Delete
  4. Internet lights keep on blingking,what to.do,,please help

    ReplyDelete
    Replies
    1. I think you are referring to Boot LOOP restart mode. This mode sets in once the device is updated with unstable software. there are few unstable software which can be different for each device.

      However, good news is; there is a fix to it.

      Please follow each step in the following post to fix this problem once for all.
      http://www.howtofate.tk/2016/05/restart-boot-loop-after-attempting-to.html

      Hope it helps.

      Delete
  5. hi! quicknet data sim of STC is not working. it's not connecting and has no signal. but regular STC calling/voice sim has signal? what to do?

    ReplyDelete
    Replies
    1. It seems software is not installed properly. Try re-installing software, or changing apn setting to auto mode. It will fix ur issue.

      Delete
  6. some one can help or contact me at 581439106 here in ksa need help for boot loop.
    Awaiting reply
    Thanks

    ReplyDelete
    Replies
    1. Kindly see my post on boot loop restart, it will fix your problem. Anymore help u need, post here ur problem. Thanks

      Delete
  7. Apn is assessors parcel quantity. This is strictly a range of assigned by using the county asses for the cheap dissertation writers or for a particular house deal with. It has no relevance to a bpo, apart from specifying the actual property.

    ReplyDelete
  8. if i update my firmware to 1.02.32 my router is have a booting problem. i need to update to 1.02.33 but there is no LTE update TAB. any 0ne can help me.

    ReplyDelete
  9. my sim is not getting recognized

    ReplyDelete
  10. I do the same as said above but my router,s sim light does not up
    and in system show simcard not detected.

    ReplyDelete
  11. dear my router only show umts but not working in lte how working in lte

    ReplyDelete

Booking.com
Related Posts Plugin for WordPress, Blogger...