How to unlock mobily 4G LTE router QDC in one attempt 2016
Free Access to Technical Education #FATE
Crack it all by yourself, no need to go anywhere. I am not a tech at all, but i like to solve my problems and issues myself, usually i get succeeded.
Warning: Router will restart many times and you need at least 30min to finish all procedure. Never leave it in middle. Also this is purely my personal recommendation which we did for myself. Any damage happens to your router, We are not responsible at all for any thing. Do at your own risk. If you are ready to take risk, follow steps carefully.
Here is the method on how to unlock Mobily 4G LTE QDC router to unlock by yourself in one attempt
Step 1: Things we need
Its very simple, all you need is:
1. Mobily 4G
2. Remove if any sim card in router (V. Important, if u leave it there, problems can happen)
and
3. Following 3 files..
https://docs.google.com/file/d/0B1d3...it?usp=sharing
https://docs.google.com/file/d/0B1d3...it?usp=sharing
https://docs.google.com/file/d/0B1d3...it?usp=sharing
Download. Ok..Lets proceed to next step
Step 2: Go to 192.168.2.1
If you have any password, use that and enter the setup.
If you didn't change password since you bought it, default password it says
If your Firmware is as shown above 1.02.32 then proceed to next step 5
My recommendation even if your version is 1.02.32, still do step 4 and update your firmware, as the firmware thats already installed is from mobily.
If its 1.02.33 or 1.02.41 then proceed to step 4:
Step 4: Downgrade Firmware
In order to avoid any damage / one time attempt in unlocking, follow this
The Zip file have two firmware
1.02.33 (mr7015al-zz_r0b_FW_1.02.33(20120618))
and
1.02.32 (mr7015al-zz_r0b_FWN_1.02.32(20120330))
Click on the Firmware Update->than browse file 1.02.32 (mr7015al-zz_r0b_FWN_1.02.32(20120330))
then press UPDATE
As you can see now, version should be 1.02.32, if yes, proceed to next step
Step 5: Updating the LTE Module
Click on the LTE Module Upgrade -> than browse file LTE_20120321_1K5QCI_4036_M0.02
then simply press LTE UPDATE as shown below
This reboots the router again .Sometimes it will not respond even up to 2 minutes , let it finish flashing. Have patience!
Step 6: Click on the Adv.Setting
Vendor Profile select- no profile unlock – MCC/MNC: 0/00 - test
SIM Lock - de select -
Allow Op List --- 42003,42075 ---- with comma in between, picture below shows only one number, but i recommend to put both numbers.
Check Firmware info time-2-3 or 1-2
Change Firwareinfo URL to 0.00.00.00
(Its very Important step, otherwise you will have auto update by mobily and router will be locked again, and you have to unlock it again with whole process...)
and click Apply changes
Step 7: Click on the AT Command
> SIM Security -> Disable-> submit
as shown below in picture
Free Access to Technical Education #FATE
Crack it all by yourself, no need to go anywhere. I am not a tech at all, but i like to solve my problems and issues myself, usually i get succeeded.
Warning: Router will restart many times and you need at least 30min to finish all procedure. Never leave it in middle. Also this is purely my personal recommendation which we did for myself. Any damage happens to your router, We are not responsible at all for any thing. Do at your own risk. If you are ready to take risk, follow steps carefully.
Here is the method on how to unlock Mobily 4G LTE QDC router to unlock by yourself in one attempt
Step 1: Things we need
Its very simple, all you need is:
1. Mobily 4G
2. Remove if any sim card in router (V. Important, if u leave it there, problems can happen)
and
3. Following 3 files..
https://docs.google.com/file/d/0B1d3...it?usp=sharing
https://docs.google.com/file/d/0B1d3...it?usp=sharing
https://docs.google.com/file/d/0B1d3...it?usp=sharing
Download. Ok..Lets proceed to next step
Step 2: Go to 192.168.2.1
If you have any password, use that and enter the setup.
If you didn't change password since you bought it, default password it says
Leave Blank, and enter the SUBMIT button
Step 3: Next step is to check your Firmware version
Follow the picture and identify
My recommendation even if your version is 1.02.32, still do step 4 and update your firmware, as the firmware thats already installed is from mobily.
If its 1.02.33 or 1.02.41 then proceed to step 4:
Step 4: Downgrade Firmware
In order to avoid any damage / one time attempt in unlocking, follow this
The Zip file have two firmware
1.02.33 (mr7015al-zz_r0b_FW_1.02.33(20120618))
and
1.02.32 (mr7015al-zz_r0b_FWN_1.02.32(20120330))
Click on the Firmware Update->than browse file 1.02.32 (mr7015al-zz_r0b_FWN_1.02.32(20120330))
then press UPDATE
As you can see now, version should be 1.02.32, if yes, proceed to next step
Step 5: Updating the LTE Module
Click on the LTE Module Upgrade -> than browse file LTE_20120321_1K5QCI_4036_M0.02
then simply press LTE UPDATE as shown below
This reboots the router again .Sometimes it will not respond even up to 2 minutes , let it finish flashing. Have patience!
Step 6: Click on the Adv.Setting
Vendor Profile select- no profile unlock – MCC/MNC: 0/00 - test
SIM Lock - de select -
Allow Op List --- 42003,42075 ---- with comma in between, picture below shows only one number, but i recommend to put both numbers.
Check Firmware info time-2-3 or 1-2
Change Firwareinfo URL to 0.00.00.00
(Its very Important step, otherwise you will have auto update by mobily and router will be locked again, and you have to unlock it again with whole process...)
and click Apply changes
Step 7: Click on the AT Command
> SIM Security -> Disable-> submit
as shown below in picture
Step 8: Optional but Recommended
If you are afraid, proceed to step 9
Now most people say that 1.02.32 is unstable firmware, i also agree with them, what i did to solve this. I did an experiment and it was successful
I upgraded again my firmware from 1.02.32 to 1.02.33 by uploading this file to firmware
1.02.33 (mr7015al-zz_r0b_FW_1.02.33(20120618))
after this is done, proceed to step 9
Step 9: Click on the LTE/UMTS
Make changes for your network setting (like APN or dial no.) - then Apply change
You are good to go now, its unlocked and you need to set the APN settings only,
which you can find HERE
However if you don't like this to change APN settings every time you switch to a New service provider, do following changes...
Change 'always connected to Auto traffic triggered' as shown above in picture and step 2 is to leave APN 'blank' (means don't write anything in this line).
Apply changes
and then restart the router.. It should be working fine..
THE End: Enjoy
Hopefully you enjoyed this tutorial, and success in 1st attempt. If any problem happens, comments are welcome for the improvement and i may bring some new invention to solve that.. Keep visiting us for updates
Great to the point n 100 % working, thanks for it. I unlocked it and using with all sims.. God Bless U
ReplyDeleteThank you so much. I've been looking for a tutorial for a very long time, until I found this! Again, Thanks and God Bless!
ReplyDeleteThis comment has been removed by the author.
Deleteits worked over a day, then again it was converted back to mobily next morning.. Did i miss something? help will be appreciated
ReplyDeleteHi, can i configure also this mobily 4g router as an access point..How...? thanks.
ReplyDeleteI unlock my device and its work perfectly for a few minut. After when I restart my device it's continuously restarting. How can I rectify this prob. Pls help me
ReplyDeletehi Jasir,
Deleteyour device is in a state called BOOT LOOP Restart, i had this problem also..
here is how i solved it
Follow each and every step as shown in post below
Follow this link
http://www.howtofate.tk/2016/05/restart-boot-loop-after-attempting-to.html
Hope it solves the issue.
need anymore help, feel free...
Hi I am Russel. I did all the procedure wat you have mentioned but still Signal : no signal / Status : searching for network. Pls help me. My email- russelkumar@gmail.com
ReplyDeleteI did got that as well. But later I followed step 6 again . And as author said next post steps. I followed it and solved problem.
DeleteThanks a lot
ReplyDeleteGod bless you
your welcome
DeleteHi sir my router continuously restart no single now what am do plz tel me
ReplyDeletePlease follow all step by step method to fix this problem once for all.
Deletehttp://www.howtofate.tk/2016/05/restart-boot-loop-after-attempting-to.html
Be careful, not to miss a single step. Read all words and follow all the steps in order not to waste your precious time.
Hope it helps. any more queries feel free to contact me.
My router all light on but my ssid no show and no connect today my mistake im opn sting and apn this option
ReplyDeletehttp://192.168.2.1/cgi-bin/logout.exe
after my router no show signal and ssid ples hlp m
oh. so sad to hear that.. So u are not even having any single light blinking on ur router? If nothing there then u probably have damaged the power IC. U need to replace that.. if u can post picture that will be suitable to see and sort whats the actual problem?
DeleteHowever even if there is 1 light blinking then its still in our hands and we can restart the whole software process and it should be working again...
Hope it helps
thanks for the tutorial.
ReplyDeletethe router only connects to 3g not lte (after this update), is there a fix for this?
i am facing the same issue...
DeleteMohammad, sorry for late reply, the fix was for4G as well, but it depends if the area is covered for 4G of particular distributor.
DeleteI am also facing same problem. Area is 4g but it connects only 3g when only 4g band selected there are no signals. Can you provide any fix.
DeleteI do the same as said above and my router is working 100% for all sims in saudi arabia...thanks alot
ReplyDeleteI want to take it in Pakistan ,Does it will work there also....
one small more issue is that 4G is not coming now , it is getting only 3G service, i used the sim at the same place in another modem , 4G is coming but this one is getting only 3G , may be 4G file not installed properly, pls advice
DeleteHi Mohammad, sorry for late reply, the fix was for4G as well, but it depends if the area is covered for 4G of particular distributor.
DeleteI do the same as said above and my router is working 100% for all sims in saudi arabia...thanks alot
ReplyDeleteI want to take it in Pakistan ,Does it will work there also....
hi, i have unlocked my QDC but it is restarting & on/off light blinking.
Deletewhat i should to do?
It is boot loop restart. Please follow my next post on fix of boot loop restart and follow steps properly. It will fix it all.
Deleteworking fine but 4g not work
ReplyDeleteif you have any solution give me reply
I would suggest u try other network sim and see if LTE works on it or no. If still it shows the same, u need to re-install the 4g patch again, but u have to keep in mind that by doing so, ur router can go in re- start loop cycle and u need time to fix it. So u suggest u to it in ur free time as u need at least 30-45 min of ur time if u follow each and every step carefully in my blog posts. Hope it helps fix ur issues.
DeleteHi,
Deleteplz explain me 'how to re-install the 4g patch again'
and the link u provided to fix BOOT LOOP RESTART(http://www.howtofate.tk/2016/05/restart-boot-loop-after-attempting-to.html) is not working
Plz help me how to fix it
hi, i have unlocked my QDC above mentioned solution but it is restarting & on/off light blinking.
ReplyDeletewhat i should to do?
It's restart loop. It can be fixed easily. U have to follow my post each and every step carefully and not to miss the last part. There is stable version, after update u need to install that particular version.
DeletePlease I advise u to follow the post each and every step carefully and I'm 100% sure that ur problem will be fixed. Hope it helps.
Any more problems, I'm here to help.
It's restart loop. It can be fixed easily. U have to follow my post each and every step carefully and not to miss the last part. There is stable version, after update u need to install that particular version.
DeletePlease I advise u to follow the post each and every step carefully and I'm 100% sure that ur problem will be fixed. Hope it helps.
Any more problems, I'm here to help.
Hi! i have unlock it. but using quicknet data sim of STC is not working. theres no signal. but using regular STC voice/calling sim in it is working. what to do?
ReplyDeleteHi there
DeleteGood to hear that u were able to unlock it. Now the problems of sim that u are facing is not the software or hardware problem. It's the APN setting issue. Please follow my last post on APN settings in my blog and it will solve ur problems hopefully and do update us.
Hi there
DeleteGood to hear that u were able to unlock it. Now the problems of sim that u are facing is not the software or hardware problem. It's the APN setting issue. Please follow my last post on APN settings in my blog and it will solve ur problems hopefully and do update us.
Hello Sir,
ReplyDeleteYesterday I purchase a Zain Data Sim and used in Mobily 4G Connect Mini Wifi Router, it worked fine but it shows 3G network only.
It is showing 4G if I insert Mobily Sim.
Can you please advise me how to resolve this issue and get 4G network for Zain?
Hi Ramesh, sorry for late reply, the fix was for4G as well, but it depends if the area is covered for 4G of particular distributor like Zain.
DeleteHi can I use this method to unlock WLTFQR-117GN
ReplyDeleteI will post soon another blog on this particular type.
Deletehi sir, i unlock my router successfully but not getting any 4G signal only 3G. pls. give me advise on what to do to fix it..thanks a lot
ReplyDeleteThe fix was for4G as well, but it depends if the area is covered for 4G of particular distributor.
Deletehi my mobily 4g router model :-QDC yesterday firmware updated and sim working ok but morning on my router but not working blinking only on/off light and signal light blink some times only plz advice how to rectify problem.
ReplyDeleteI think you forgot to change IP address to 0.00.00.0,
DeleteKindly follow steps as per boot loop restart post. Hope it helps
can you make blog about the zain 4g router model e5172as-22. thanks
ReplyDeleteSure , thanks for visiting my blog. Many new posts will come in next few days.
DeleteHi how are you doing?
ReplyDeleteI did everything as shown but later when I insert my Zain internet sim, it shows the message "Searching for network" and the "internet" LED on my router keeps blinking.
Can you identify what's wrong?
Software is not installed properly. U need to update the router by removing GSM post. And then upgrade again. It will solve the issue.
DeleteHello, i followed till step 4 and downgraded the version, after that there's only on/off light blinks and the web browser is not loading which in-turn not allowing me to move to the next step, plz reply.
ReplyDeleteKindly follow post of boot loop restart. It will fix your issue. Hope it helps
DeleteThis comment has been removed by the author.
ReplyDeleteHello,
ReplyDeleteI have downgraded to .32 firmware but when I applied the LTE_20120321_1K5QCI_4036_M0.02 it says wrong upgrade firmware and it doesn't want to load the fimware at all. Any thought about this?
After trial and error, it worked, alhamdulillah. Btw I follow the tutorial from https://www.youtube.com/watch?v=8u4Lj3fZswM&feature=youtu.be
DeleteThanks Bondsman for suggesting link to other users.
DeleteThis comment has been removed by a blog administrator.
ReplyDeletethank you bro
ReplyDeleteyour welcome. thanks for visiting my blog
DeleteThank you so much
ReplyDeleteyour welcome, thanks for visiting my blog!
Deletehai bro, i have small doubt, first of all u r mentioning to remove the sim in step1, if do that so without the internet connection how can i check is it working or not, and if i remove the sim i can do only step1 coz i can't go further without intenet
ReplyDeleteGood to mention, You need to download files first, then you can remove sim, rest of the procedure>you don't need sim, sim's network signal will interfere with our update.
DeleteHope it clears the doubt.
Anymore help, i am here. Thanks for visiting my blog!
hi can you help me how to unlock mobily 4g router model WLTRQR-117GN (FOR FREEE) THANKS
ReplyDeleteCan i do the same for huawei 4g router provided by go etisalat.
ReplyDeleteI would like to use stc sim in router provided by go. Will it work.
Can i do the same for huawei 4g router provided by go etisalat.
ReplyDeleteI would like to use stc sim in router provided by go. Will it work.
Model b310 96c6
hi it seems when i try to update ipkg invalid
ReplyDeleteany solution plzzzzzzzzz
how to unlock mobily 4g router wltfqq-124gn
ReplyDeleteHow to know that my qdc device is running 3G or 4G internet,whether by the LTE light(on or off) or there is any other way to check .....
ReplyDeleteHello
ReplyDeleteWhat do u people think that '2.35 Mbps download speed and 0.20 Mbps upload speed' is 3g or 4g coverage.....
while the LTE light on the router is on
Hello Boss I checked Firmware Version this was .33 so as per your instructions i upgraded it to .32 but now the router is rebooting after each 5 seconds.
ReplyDeleteAnybody using 4g band after unlocking. I have unlocked but 4g band is not working for any sim. Only 3g please provide some solution of you have..
ReplyDeleteAdmin can you provide any other latest and updated Lte module for this modem?
ReplyDeleteHi how are you doing?
ReplyDeleteI did everything as shown but later when I insert my Zain internet sim, it shows the message "Searching for network" and the "internet" LED on my router keeps blinking.
Can you identify what's wrong?
Shawon
ReplyDeleteHi bro i already unlock mobily 4G LTE router QDC but i 4G network is not working for STC network ,but we have STC 4G Tower near to our area also 4G network working with other routers, how can we fix this issue?
ReplyDeleteIs this device will work in Pakistan??
ReplyDeleteYes it works in Pakistan but after unlocking only 3g network is working.when select only 4g. It shows no signals
DeleteAlhamdulillah! It's working Thanks brother and really appreciate you for your effort.
ReplyDeleteI have unlocked but 4g band is not working for any sim. Only 3g please provide some solution of you have.india chevked all sim 4g not getting
ReplyDeleteI have a 1.10.40dv firmware version, but i try downgrade it says invalid version or file. What i can do?
ReplyDeleteHello sir PTA approved firmware
ReplyDelete